Grid Tied Micro-Inverter Use Concept - Wind Turbines - Efficient Legal

Author	Message
Technophiliac Regular Member Joined: 18/12/2020 Location: New Zealand Posts: 92	Posted: 05:16am 24 Nov 2021         Godoh said   Hi Techno. Depends on what voltage the wind turbine puts out. "48V" AC - but no doubt voltage varies widely.....   Godoh said   Most of the Grid tie inverters I have seen want at least 150 volts input to work, some  can run with up to 600 volts DC. This is what I had in mind Pete: https://www.enfsolar.com/pv/inverter-datasheet/13238 - the HME-1350-AU I trust of interest, 4 inputs, voltages up to 60V, each pair of inputs I understand can be wired in parallel, I am seeking clarification if all 4 inputs can be paralleled, I suspect not. Thanks for considering and replying.