Guru
Joined: 31/12/2016
Location: AustraliaPosts: 1309
| Posted: 12:01am 26 Nov 2022 |
Hi Brian,
The nozzle was the standard .4mm this time, the print speed was fairly fast 80mm per second as its a test print, it looks better than the photo shows it.
Printed using red PLA+ for most of it as its good for printing samples, but I have not had much success with this no name brand.
Notice the brake shoe is a red brown colour, it is standard PLA and better quality and printed much better (same settings), the clear parts are PETG, will use more of that and ABS later.
The main bolster has functional springs mounted underneath same as the real one.
