Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
Bryan1 Guru Joined: 22/02/2006 Location: Australia Posts: 2137	Posted: 04:25am 01 May 2026       Ok my inverter isn't one of Mikes designs and for the pre start that resistor bank and 450amp switch is a true KISS concept I used for my inverter. For startup just turn on a circuit breaker thats connected to VBat and watch on the LCD screen the voltage rise, when the voltage is stable turn on the 450 amp switch and turn off the circuit breaker then hit the start switch on the inverter.