Inverter building using Wiseguys Power board and the Nano drive board

Author	Message
KeepIS Guru Joined: 13/10/2014 Location: Australia Posts: 2194	Posted: 05:04am 01 May 2026       @Bryan1, the major reason I / we use a Kilovac, is not just for auto fail safe pre-charge, it is for fault and over current protection, no burnt boards, very limited damage, and more technical reasons, like over-voltage protection for the Inverter, DC input over current protection, most of this protection under full supervision of the controller and Micro-controller, this is by my definition, a real Inverter.