phil99
 Guru
 Joined: 11/02/2018 Location: AustraliaPosts: 2564 |
Posted: 08:44am 30 Aug 2024 |
|
|
|
You will get more responses if you re-post on the Microcontrollers and PC projects page.
The first step is to find out what the original list of setup Options was. Clear Flash will have wiped everything so you need to set them up again.
If you can't find them get the original .uf2 from the Silicon Chip site and load that. That should get it back to the way it was. Then print them with OPTION LIST and save that to a file.
Then re-flash with 5.08.00 and reload those options. |