tempr not working

Author Message
Peter63
Senior Member

Joined: 28/07/2017
Location: Sweden
Posts: 197
Posted: 09:00am 21 May 2026      

  Quote  some more info  ..at the time when timeout parameter was introduced

i tested the program
  Quote  TassyJim's test program with some mods for the PicoMite.


, and this display OK temp value...

Family name: DS1820/DS18S20
Rom Code:    10 B4 65 B5 02 08 00 CA
ScratchPad:  32 00 00 00 FF FF 0A 10
Power mode   Parasitic


ScratchPad:  32 00 FF FF FF FF 0A 10
Temperature:  25.0625  775.005mS, 9 bit

ScratchPad:  32 00 FF FF FF FF 0B 10
Temperature:  25.125  774.997mS, 10 bit

ScratchPad:  32 00 FF FF FF FF 0A 10
Temperature:  25.1875  774.974mS, 11 bit

ScratchPad:  32 00 FF FF FF FF 09 10
Temperature:  25.1875  774.985mS, 12 bit

Tempr() without start    10.625
Tempr Start Pin,0        10.625
Tempr Start Pin,1        10.625
Tempr Start Pin,2        10.625
Tempr Start Pin,3        3.125


huummm... /Peter63