Guru
Joined: 22/02/2006
Location: AustraliaPosts: 2137
| Posted: 06:55am 04 Jun 2026 |
here is the list commands
> list commands
*/ .end program .label .line .program
.side set .wrap .wrap target /* ADC
Arc Array Add Array Insert Array Set Array Slice
Autosave Backlight Bezier Bit( Bitstream
Blit Blit Memory Box Byte( Call
Camera Case Case Else Cat Chain
Chdir Circle Clear Close CLS
Color Colour Colour Map Configure Const
Continue Copy CPU CSub Data
Date$ DefineFont Device Dim Do
Drive Edit
*/ .end program .label .line .program
.side set .wrap .wrap target /* ADC
Arc Array Add Array Insert Array Set Array Slice
Autosave Backlight Bezier Bit( Bitstream
Blit Blit Memory Box Byte( Call
Camera Case Case Else Cat Chain
Chdir Circle Clear Close CLS
Color Colour Colour Map Configure Const
Continue Copy CPU CSub Data
Date$ DefineFont Device Dim Do
Drive Edit
So the camera command IS there
Now silly me forgot to load the I2C pins so did that and this is the result
> option list
WebMite MMBasic RP2040 Edition V6.02.01
OPTION SYSTEM I2C GP12,GP13
OPTION COLOURCODE ON
OPTION CPUSPEED (KHz) 252000
OPTION LCDPANEL VIRTUAL_C
OPTION WIFI Home, *********, PICOE6614104032
OPTION TELNET CONSOLE ON
> load "A:/camera.bas"
> edit
PC=
So MCCC is still hanging on that same problem
Edited 2026-06-04 17:05 by Bryan1