Just a side project

Author Message
Bryan1

Guru

Joined: 22/02/2006
Location: Australia
Posts: 2137
Posted: 06:38am 05 Jun 2026      

Well today more fun and doing everything by the manual where yesterday the webmite connected easily to my wifi yet today no luck at all. So I set it up using the hotspot on my mobile which was a bad idea as trying TPFP wouldn't work and teraterm just won't connect at all.

Now for the first time I found the MCCC file manager   so tried uploading doing that

Processing file: C:\Users\Bryan\Documents\index.html

>
2 directories, 1 file, 577536 bytes free
Blocks: 10
Reverting to XMODEM
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Responce not found at block 1
Transfer failed!
Finished


Sending 1 files

Processing file: C:\Users\Bryan\Documents\camera.bas

Blocks: 21
Transfer failed!
Finished


Now this was when the webmite was off line so hooked it back up to my mobile so the webmite was online and got the same problem with the file transfer now as I did enable the TCP server could this be the problem.

Connected to COM14 at 115200
failed to connect.
> option list
WebMite MMBasic RP2040 Edition V6.02.01
OPTION SYSTEM I2C GP12,GP13
OPTION COLOURCODE ON
OPTION CPUSPEED (KHz) 252000
OPTION LCDPANEL VIRTUAL_C
OPTION WIFI Hotspot, ********, PICOE6614104032
OPTION TCP SERVER PORT 80
OPTION TELNET CONSOLE ON
> web connect "Hotspot", "*******"
PICOE6614104032 connecting to WiFi...
failed to connect.


But on the mobile it is clearly showing the pico is connected as PICOE6614104032 and 0.02mB transferred

So with TFTP down, teraterm won't connect and Xmodem refuses don't know what I've done wrong but can't upload the files to the webmite
Edited 2026-06-05 16:40 by Bryan1