| Posted: 06:47am 05 Jun 2026 |
|
|
|
Maximite Control Centre Build date: 2026/01/26 Data server on port 50900 started Control server on port 50899 started started
16:02:20 Port: COM14 inserted
failed! Check port then try again Connected to COM14 at 115200 failed to connect. > option list WebMite MMBasic RP2040 Edition V6.02.01 OPTION SYSTEM I2C GP12,GP13 OPTION COLOURCODE ON OPTION CPUSPEED (KHz) 252000 OPTION LCDPANEL VIRTUAL_C OPTION WIFI Hotspot, ********, PICOE6614104032 OPTION TCP SERVER PORT 80 OPTION TELNET CONSOLE ON > web connect "Hotspot", "*******" PICOE6614104032 connecting to WiFi... failed to connect. > web connect "Hotspot", "*******" PICOE6614104032 connecting to WiFi... failed to connect. > 16:11:00 Port: COM14 removed
Disconnected
16:11:06 Port: COM14 inserted
Connected to COM14 at 115200 WebMite MMBasic RP2040 Edition V6.02.01 Copyright 2011-2026 Geoff Graham Copyright 2016-2026 Peter Mather
PICOE6614104032 connecting to WiFi... Connected 10.164.39.40 Starting TCP server at 10.164.39.40 on port 80 > 2 directories, 1 file, 577536 bytes free Sending 1 files
> Processing file: C:\Users\Bryan\Documents\camera.bas
> 2 directories, 1 file, 577536 bytes free Blocks: 21 Reverting to XMODEM
16:11:53 Port: COM14 removed
Disconnected
16:11:53 Port: COM14 removed
Disconnected
16:11:53 Port: COM14 removed
16:11:54 Port: COM14 inserted
Connected to COM14 at 115200
16:11:54 Port: COM14 inserted
Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Responce not found at block 1 Transfer failed! Finished 2 directories, 1 file, 577536 bytes free
>
This was the result trying again now as MCCC did a reboot after I started the upload the webmite was taking time to connect so if I stopped the TCP server could this be the cause of my problem
Now just tried a TFTP with a fresh connection where the webmite found the wifi
Connected to COM14 at 115200 Connected 10.164.39.40 Starting TCP server at 10.164.39.40 on port 80 >
C:\Users\Bryan>TFTP -i 10.164.39.40 PUT C:\Users\Bryan\Documents\camera.bas camera.bas Connect request failed
Yesterday when a TFTP started MCCC saw it and showed the output but today nothing comes up. Edited 2026-06-05 17:01 by Bryan1 |