Guru
Joined: 22/02/2006
Location: AustraliaPosts: 2137
| Posted: 02:35am 06 Jun 2026 |
Ok had a good think about this and the lack of wifi around my shed now with that Ubi router I put in back the start of '24 accepts Ethernet and just works putting the webmite beside didn't get a signal so I have raised a ticket and should get an answer in the next week.
Now as I did have a spare ethernet port in the hub connected up my old shed wifi repeater that worked for years. Anyway checked on my phone for wifi and it was there
Connected to COM14 at 115200
WebMite connecting to WiFi...
Connected 192.168.1.29
> option list
WebMite MMBasic RP2040 Edition V6.03.00RC7
OPTION SYSTEM I2C GP12,GP13
OPTION COLOURCODE ON
OPTION CPUSPEED (KHz) 252000
OPTION LCDPANEL VIRTUAL_C
OPTION WIFI WiFi-Repeater, *********, WebMite, AU
OPTION TELNET CONSOLE ON
>
> TFTP request to create binary file : camera.bas
TFTP transfer complete
TFTP request to create binary file : index.html
TFTP transfer complete
> files
A:/
<DIR> .
<DIR> ..
00:00 01-01-2024 4 bootcount
00:02 01-01-2024 2658 camera.bas
00:03 01-01-2024 1186 index.html
2 directories, 3 files, 520192 bytes free
>
WebMite connecting to WiFi...
Connected 192.168.1.29
> option list
WebMite MMBasic RP2040 Edition V6.03.00RC7
OPTION SYSTEM I2C GP12,GP13
OPTION COLOURCODE ON
OPTION CPUSPEED (KHz) 252000
OPTION LCDPANEL VIRTUAL_C
OPTION WIFI WiFi-Repeater, *********, WebMite, AU
OPTION TELNET CONSOLE ON
>
> TFTP request to create binary file : camera.bas
TFTP transfer complete
TFTP request to create binary file : index.html
TFTP transfer complete
> files
A:/
<DIR> .
<DIR> ..
00:00 01-01-2024 4 bootcount
00:02 01-01-2024 2658 camera.bas
00:03 01-01-2024 1186 index.html
2 directories, 3 files, 520192 bytes free
>
Now the fun can continue
