Elemento - it's just a tiny bit magic. :)

Author	Message
Mixtel90 Guru Joined: 05/10/2019 Location: United Kingdom Posts: 9029	Posted: 07:52am 09 Jul 2026       I did consider doing that with the VGA but there is a problem with the PCB fixing screw in that corner. There is no access to it so to get the display connector as tight into the corner as possible it has to plug in. So both the VGA and the Adafruit module are mounted connector-side down, on spacers. Nothing along the front or the sides of the board projects through the front or sides of the case. Or at least it shouldn't. :) Reset buttons are supposed to be "down a hole and poke it with a stick" type. It should be easy enough to hook the rear components of the PCB into the case then hinge them together.