Elemento - it's just a tiny bit magic. :)

Author	Message
Mixtel90 Guru Joined: 05/10/2019 Location: United Kingdom Posts: 9029	Posted: 07:53pm 12 Jul 2026       That's fine. My board has a 5V header and the Adafruit board is fitted with a flying lead to plug into it. A LCD board could work in the same way. If you want 3V3 for the display then that could be fed from that, I suppose. I had to do it that way as the VGA connector would hit a 5V header aligned with the Adafruit. Remember, the display boards are "upside down" so that they can be lifted high enough to miss the PCB fixing screw and still fit into the case. :)