What are these SolarEdge components?

Author	Message
NomadAU Newbie Joined: 26/08/2025 Location: Australia Posts: 5	Posted: 06:09am 08 Jul 2026       Hi all Just dismantled a very heavy unused SolarEdge inverter (model SE17K), looking for toroids.  No luck on that score but I did get a number of largish caps and a lot of other bits that could be useful.  The weight was due to a couple of very solid, potted components, one significantly heavier than the other. I was hoping someone might be able to identify what they are, and if they might be useful to my Warpverter build? Cheers Mike Just added another pic showing the relative sizes of the units. Edited 2026-07-08 16:19 by NomadAU
phil99 Guru Joined: 11/02/2018 Location: Australia Posts: 3349	Posted: 08:13am 08 Jul 2026       Heavy with 2 fat wires says "inductor" to me.
NomadAU Newbie Joined: 26/08/2025 Location: Australia Posts: 5	Posted: 03:31am 09 Jul 2026         phil99 said   Heavy with 2 fat wires says "inductor" to me. Thanks for that.  Makes sense - I just realised it's a 3-phase unit, so there's 2 inductors per phase (one small and one large).