Guru
Joined: 04/06/2022
Location: GermanyPosts: 1537
| Posted: 09:51am 25 Jul 2026 |
Hello Manfred!
I’ve just had a quick look at the website.
The barrier to entry is even lower than you describe.(point "Welche Hardware benötigst du?")
You can start with just a Pico and a terminal programme.
At least, that’s how it was for me. Then I soldered on the VGA output, then and an SD card reader and then the Audio output. It all cost just a few cents. If you’re put off by that, you can also try it out first with DOS-MMBASIC or MMB4W without needing any additional hardware at all.
But your book is still a brilliant idea; I’ll carry on reading it. Have a lovely weekend
Cheers
Martin