Guru
Joined: 15/07/2006
Location: AustraliaPosts: 676
| Posted: 12:03am 20 Jul 2017 |
Fitting the pipes was a bit of a challenge. They must stay parallel.
Lifted onto the trailer. Fit the motor and batteries. And test it, see if it runs, and yes it does. I had the controller programmed at the factory to run forward controls, but one steering bracket got missed from the box, so temporary, I will use the joystick as forward and reverse and the makeshift alloy flat bar as steering handle. I can't use the normal tiller steer on the motor as the back of the boat is in the way.
Trev @ drivebynature.com