 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Colour Maximite 2 G3
| Author | Message | ||||
| matherp Guru  Joined: 11/12/2012 Location: United KingdomPosts: 12220 |
The Colour Maximite 2 with HDMI. Full details on https://mather.host/cmm2/g3/ The G3 is a G2 whose picture goes to an HDMI transmitter instead of VGA, and whose sound plays through the HDMI screen and the audio socket at the same time. Everything else is the G2's, so G2 programs and add-ons work on it unchanged.  The final design files reference in the web page have a two pin header by the on/off switch do you can omit the switch if required and jumper the header or use it to connect a separate switch. |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 9364 |
Brilliant work yet again, Peter. :) You've even managed to make javavi happy. :) Mick Zilog Inside! nascom.info for Nascom & Gemini |
||||
| terekgabor Senior Member  Joined: 02/01/2026 Location: HungaryPosts: 166 |
I ordered a G2 one hour before   |
||||
| Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 9364 |
Of course. It always works out like that. :) Mick Zilog Inside! nascom.info for Nascom & Gemini |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2026 |
