Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 09:19 22 Nov 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : pc386 for CMM2

Author Message
PilotPirx

Senior Member

Joined: 03/11/2020
Location: Germany
Posts: 176
Posted: 01:23pm 19 Nov 2026
Copy link to clipboard 
Print this post

Hello,
I'm using a CMM2G2V2 with pc386.app and DOS6.22. The emulator is a lot of fun—even the mouse and the Emm386 work, and all those DOS memory problems are popping up again.
It makes you feel 30 years younger...
But many games suffer from poor performance. For example, the old Commander Keen games stutter during vertical scrolling. Arkanoid is also very slow. That's why I have two questions:
1. Is there a way to improve performance?
For example, could I disable the sound card emulation and use PC speakers instead?
2. Is there a list of programs and games that work well with this emulator?
What programs do you use?

What works for me:
Norton Commander
Duke Nukem (no 3D)
Prince of Persia

I'd love to hear about your experiences.
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 10140
Posted: 11:39pm 19 Nov 2026
Copy link to clipboard 
Print this post

My guess would be that the CMM2 is basically just being pushed to the limit on that kind of thing.  My 2c only - there may be a way to improve things, but we're asking a lot of the STM chip, to emulate things AT ALL, and to emulate a 386 system and THEN try to run DOS games on it.....might just be a byte too far.  

I expect it runs DOS apps just fine, but games would be another thing entirely, due to their graphics requirements.

I hope to tinker around with the 386 emulator soon, so I will post any results, but I was not really ever planning to try to run DOS games on it, more like word processors and database applications and things like that, which only require very modest graphics abilities.

Apparently Windows 3.11 runs OK, and even Windows 95, but "Slowly" was the comment made, so I expect that an install of Windows 95 would also be clunky and sluggish in the same way that DOS games are, and probably for the same reason.

Again, all of this is only speculation on my part, but my gut is telling me that the STM chip is basically maxed-out.    
Smoke makes things work. When the smoke gets out, it stops!
 
Mixtel90

Guru

Joined: 05/10/2019
Location: United Kingdom
Posts: 9383
Posted: 09:07am 20 Nov 2026
Copy link to clipboard 
Print this post

The CMM2 doesn't have a GPU as such, it doesn't even have two cores like the RP2040/RP2350 so you can't farm the display off to another core. Everything is going to be simulated in software. Ok, it's a fast chip with a decent amount of RAM but scrolling a full 640x480 colour display is a lot of work! I think you can forgive some slowdown.
Mick

Zilog Inside! nascom.info for Nascom & Gemini
 
PilotPirx

Senior Member

Joined: 03/11/2020
Location: Germany
Posts: 176
Posted: 03:58pm 20 Nov 2026
Copy link to clipboard 
Print this post

Are there any recommendations for “serious” applications like word processors and database applications?
 
Mixtel90

Guru

Joined: 05/10/2019
Location: United Kingdom
Posts: 9383
Posted: 05:55pm 20 Nov 2026
Copy link to clipboard 
Print this post

Yes. Run them on a computer, not a microcontroller.
Perhaps that sounds a bit harsh, but the fact remains that all the "serious" applications were never written to run on a microcontroller, not even a fast one emulating a foreign CPU.
Mick

Zilog Inside! nascom.info for Nascom & Gemini
 
JohnS
Guru

Joined: 18/11/2011
Location: United Kingdom
Posts: 4404
Posted: 08:32pm 20 Nov 2026
Copy link to clipboard 
Print this post

Maybe DOS and ... WordStar?

Too retro?

WordPerfect?

John
 
mclout999

Guru

Joined: 05/07/2020
Location: United States
Posts: 534
Posted: 10:56pm 20 Nov 2026
Copy link to clipboard 
Print this post

  JohnS said  Maybe DOS and ... WordStar?

Too retro?

WordPerfect?

John

I used WordStar for a very long time back in the day. During my college years. I think I prefer it still. It's all muscle memory, and it's all from. The home row. That's how it was designed. After you get it ingrained in your head, it's become second nature. I should probably get an emulator running and see if I can still remember how to type on that thing.
They call me Shai-Hulud (The maker)
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 10140
Posted: 11:41pm 20 Nov 2026
Copy link to clipboard 
Print this post

I used "Professional Write" back in the DOS days.
It was a really good but simple DOS-based word processor.

You can still download it today, for free.

LINK...

I used v2.0, but there was also v1.0 and v3.0 for DOS, and a Windows 3.1 version too called "Professional Write Plus"

It's these older programs I plan to just tinker around with.
Not for anything actually useful, just to tinker.  
Smoke makes things work. When the smoke gets out, it stops!
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026