Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 09:19 22 Nov 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Retromax 2 Gen 1 or 2?

Author Message
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 244
Posted: 10:02pm 20 Nov 2026
Copy link to clipboard 
Print this post

I have a CircuitGizmo Retromax 2 board I broke out since the new software is out. What generation board is it? I tried the Amiga emulator and it says it needs a Gen 2 or newer. I am guessing it is Gen 1, but what is the difference from a Gen 2? How does it know when software runs? Just wondering...
(sorry about the blank message , dog bumped my hand and off it went)
 
Wölfi

Regular Member

Joined: 14/10/2026
Location: Germany
Posts: 54
Posted: 10:29pm 20 Nov 2026
Copy link to clipboard 
Print this post

The Colour Maximite 2 User Manual (MMBasic Ver. 6.00.00) provides the following information about the G2 on page 12:

1. It uses a larger RAM chip 32MB vs 8MB) which is used to support the top VGA resolution of 1920x1080 pixels, 24-bit colour depth and provide more RAM for BASIC programs.

2. An 8-bit digital to analog converter is used for each colour channel allowing the Generation 2 computerto display true colour 24-bit images.


So you can identify yours by checking whether it supports Full HD and has 32 MB of RAM.

-----

PPS:

https://circuitgizmos.com/gizmo-store/RetroMax-CGs-Color-Maximite-2-p241231864/

Retromax 1:

Extremely fast with 516KB of program memory (about 25,000 lines) and 5MB general purpose RAM.

Rock solid VGA output with five resolutions from 1024x768 pixels to 240x216 pixels with up to 16-bit color (65536 colors).

Retromax 2:

RetroMax 2.3a is "Generation 2"
The RetroMax Generation 2 design is fully compatible with the first generation (RetroMax 1.4a), however, it has a few extra features:

- An additional 1920 x 1080 pixel VGA mode.

- 24-bit color output (in addition to the standard 8, 12, and 16-bit modes).

- Extra RAM for BASIC programs (24MB vs 8MB).

So I guess a Retromax 2 should be a full CMM2 G2 and it depends on whether your board matches these and probably some more specifications exactly.
Edited 2026-11-21 08:47 by Wölfi
 
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6642
Posted: 01:36am 21 Nov 2026
Copy link to clipboard 
Print this post

> print mm.device$


What reply do you get?

If it is CMM2 G2 it will give
Colour Maximite 2 G2

Jim
VK7JH
MMedit
 
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 244
Posted: 09:13pm 21 Nov 2026
Copy link to clipboard 
Print this post

It just says Colour Maximite 2. I guess it is a gen 1. Looks like a 8MB chip on it.
 
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6642
Posted: 09:20pm 21 Nov 2026
Copy link to clipboard 
Print this post

Yep,
It's a Gen 1 clone
VK7JH
MMedit
 
Wölfi

Regular Member

Joined: 14/10/2026
Location: Germany
Posts: 54
Posted: 09:51pm 21 Nov 2026
Copy link to clipboard 
Print this post

  gadgetjack said  It just says Colour Maximite 2. I guess it is a gen 1. Looks like a 8MB chip on it.


Are you sure it´s a Retromax 2 and not 1?
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026