TheBackShed.com

Forum Index : Microcontroller and PC projects : (MM-DM) Interesting code

Author

Message

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313

Posted: 07:10am 13 Dec 2011

Copy link to clipboard

Print this post

10 IF PIN(0)=1 THEN PIN(0)=1 ELSE PIN(0)=0
20 GOTO 10

Works on an MM, need to fix it on the DM, as it has a bug.

And what does it do?

Cheers Don... Edited by donmck 2011-12-14

https://www.dontronics.com

swoodgate

Newbie

Joined: 24/11/2011
Location: Australia
Posts: 14

Posted: 07:39am 13 Dec 2011

Copy link to clipboard

Print this post

It controls the front panel LED according to the Maximite manual and it seems like it�s meant to blink this LED but I think it should say:

10 IF PIN(0) THEN PIN(0)=0 ELSE PIN(0) = 1
20 GOTO 10

Best regards

Steve

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313

Posted: 07:40am 13 Dec 2011

Copy link to clipboard

Print this post

swoodgate said It controls the front panel LED according to the Maximite manual and it seems like it�s meant to blink this LED but I think it should say:

10 IF PIN(0) THEN PIN(0)=0 ELSE PIN(0) = 1
20 GOTO 10

Best regards

Steve

Close, but no cigar Steve.

Cheers Don...Edited by donmck 2011-12-14

https://www.dontronics.com

swoodgate

Newbie

Joined: 24/11/2011
Location: Australia
Posts: 14

Posted: 07:50am 13 Dec 2011

Copy link to clipboard

Print this post

Now I'm going to have to go home and try it!

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313

Posted: 07:56am 13 Dec 2011

Copy link to clipboard

Print this post

swoodgate said Now I'm going to have to go home and try it!

Sorry Steve.

Cheers Don...

https://www.dontronics.com

rhamer
Senior Member

Joined: 06/06/2011
Location: Australia
Posts: 174

Posted: 08:32am 13 Dec 2011

Copy link to clipboard

Print this post

donmck said

10 IF PIN(0)=1 THEN PIN(0)=1 ELSE PIN(0)=0
20 GOTO 10

Works on an MM, need to fix it on the DM, as it has a bug.

And what does it do?

Cheers Don...

Causes a rip in the space time continuum......

Rohan Hamer
HAMFIELD Software & Hardware Solutions

Makers of the Maximite Expander.

http://www.hamfield.com.au

ajkw
Senior Member

Joined: 29/06/2011
Location: Australia
Posts: 290

Posted: 09:06am 13 Dec 2011

Copy link to clipboard

Print this post

Sets the Power LED (on or off) to the state of the Bootload button.

Bryan1

Guru

Joined: 22/02/2006
Location: Australia
Posts: 1396

Posted: 09:52am 13 Dec 2011

Copy link to clipboard

Print this post

Just tried on the DM here but sworry can't give the answer away....

Also just did on the SM1 and the answer was too easy......

swoodgate

Newbie

Joined: 24/11/2011
Location: Australia
Posts: 14

Posted: 10:40am 13 Dec 2011

Copy link to clipboard

Print this post

That'll teach me to read all the manual before posting a reply.

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313

Posted: 12:54pm 13 Dec 2011

Copy link to clipboard

Print this post

swoodgate said That'll teach me to read all the manual before posting a reply.

Yes, was in the manual.

Looks like the streak knives, and the world trip, goes to Anthony.

My thanks to Ken Segler for the code snippet. (After a few questions were asked)

Cheers Don...Edited by donmck 2011-12-14

https://www.dontronics.com

marcwolf

Senior Member

Joined: 08/06/2009
Location: Australia
Posts: 119

Posted: 12:01am 14 Dec 2011

Copy link to clipboard

Print this post

Streak knives?

Is that some sort of protection against streakers?

Take Care
Dave

Coding Coding Coding..
Keep those keyboards coding..
RAW CODE!!!!!

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313

Posted: 12:02am 14 Dec 2011

Copy link to clipboard

Print this post

marcwolf said Streak knives?

Is that some sort of protection against streakers?

Take Care
Dave

...///... there goes one now.

Cheers Don...

https://www.dontronics.com

Print this page

To reply to this topic, you need to log in.