Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 06:57 14 Mar 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : mmedit for linux cinnamon

     Page 5 of 5    
Author Message
stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2787
Posted: 10:40pm 03 Mar 2026
Copy link to clipboard 
Print this post

I googled rpi config.txt read only and no one has made it writable it seems, very odd. same with getting admin to change the file attributes.
thing is I had this running at 2200MHz by adding
over_voltage=8
arm_freq=2200
force_turbo=1
so I must have edited config.txt at some time.??
 
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6496
Posted: 11:40pm 03 Mar 2026
Copy link to clipboard 
Print this post

  Quote  stan,
at a command prompt
sudo nano /boot/firmware/config.txt


I was able to edit and save the file without any issues


Did you try?
VK7JH
MMedit
 
stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2787
Posted: 02:07am 04 Mar 2026
Copy link to clipboard 
Print this post

  TassyJim said  
  Quote  stan,
at a command prompt
sudo nano /boot/firmware/config.txt


I was able to edit and save the file without any issues


Did you try?


Dunno what happened but that worked
edited and saved...scratch head as tried before it was read only??
over_voltage=8
arm_freq=2200
force_turbo=1

vcgencmd measure_clock arm says 2200 so happy days :) but weird
 
stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2787
Posted: 08:35pm 04 Mar 2026
Copy link to clipboard 
Print this post

  dddns said  
  stanleyella said  I haven't got admin access yet on rpi. seems a secret and why is config.txt now read only... stop people overclocking?


I almost can't believe that overclocking is configured in this text file. I'm interested, please post the content


In Trixie OS find arm_boost=1 and comment out then add 3 lines
# Run as fast as firmware / board allows
#arm_boost=1
over_voltage=8
arm_freq=2200
force_turbo=1
 
dddns
Guru

Joined: 20/09/2024
Location: Germany
Posts: 794
Posted: 09:10pm 04 Mar 2026
Copy link to clipboard 
Print this post

Thanks Stan, I'm looking forward to buy one. You really triggered me :)
 
stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2787
Posted: 10:19pm 04 Mar 2026
Copy link to clipboard 
Print this post

@dddns- I do not know if you use mmedit to write code and load to pico but if you get a rpi 400 and install mmedit you will need this line in terminal
sudo usermod -aG dialout $(rpi user name)
This will make it connect usb to pico.
I just installed Trixie on another ssd and set it as before and it is working fine at 2200 overclock. youtube playback good.
 
JohnS
Guru

Joined: 18/11/2011
Location: United Kingdom
Posts: 4281
Posted: 10:23pm 04 Mar 2026
Copy link to clipboard 
Print this post

  stanleyella said  I haven't got admin access yet on rpi. seems a secret

You can do anything (including overwriting the whole system!) using sudo

If you want to do several things as root you can typically use
sudo bash

and you have a root shell.  You can get out of it using
exit
(or end of file, usually Ctrl-D)

But remember it is easy to ruin your system!!
(which is why they've made root a bit harder to use)

John
Edited 2026-03-05 08:24 by JohnS
 
     Page 5 of 5    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026