 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : VN7050 High-side driver
| Author | Message | ||||
| PhenixRising Guru  Joined: 07/11/2023 Location: United KingdomPosts: 1779 |
Didn't want to continue this in the AI thread and I was going to start a thread about it after I learned more but here is my summary thus far: -High-side driver that can be driven directly from the MCU -Voltage range 4V to 28V -No need for fusing due to short-circuit/overcurrent protection -Can detect open-circuit, short-circuit -LCSC has thousands -The 16pin model (higher current) < $1 -Analog feedback with EN which allows many devices to feed a single ADC. vn7050as.pdf |
||||
vegipete Guru Joined: 29/01/2013 Location: CanadaPosts: 1164 |
Interesting chip, thanks! I've often used chips like the Toshiba TBD62783Axx for high side driving. Eight channels in an 18 pin chip. Less protection and no feedback than yours, but more channels... Visit Vegipete's *Mite Library for cool programs. |
||||
| PhenixRising Guru Joined: 07/11/2023 Location: United KingdomPosts: 1779 |
Fits perfectly with my quest for what I have dubbed SYCAR Stuff You Can Actually Repair Intelligent diagnostics for everything and if this works-out,  |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2026 |
