 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : (DM) Temperature measurement
| Author | Message | ||||
| Olimex Senior Member  Joined: 02/10/2011 Location: BulgariaPosts: 226 |
I did small project today with KTY81.110 PTC sensor. It's nice and cheap -55C +150C temperature sensor, which I intend to use for Solar Water Heater controller / logger and Duinomite was the natural choice 
Link to the project |
||||
vasi Guru  Joined: 23/03/2007 Location: RomaniaPosts: 1697 |
Finally (well, I saw the date of the first article, but wasn't operational until recently), Olimex have a decent blog. May I suggest you to use Drupal for your entire website? Apart from a nice uniform appearance, it can have news/blog module, forums, online shop (or, if security is a matter, then only a nice presentation of your products which deserve a great looking website). Vasi Hobbit name: Togo Toadfoot of Frogmorton Elvish name: Mablung Miriel Beyound Arduino Lang |
||||
herbnz Senior Member Joined: 18/02/2007 Location: New ZealandPosts: 258 |
Hi Interesting to see the use of arrays. I have been working on measuring fuel consumption in my boat. To date the main consideration is to get the flow sensors working but have made a simple prog to monitor but using a formula to calculate results. ie count the pulses over a time period and * 0.0005 being the litres per pulse. I may later do flow tests and get accurate in site figures and use the array method shown here. Herb |
||||
| Olimex Senior Member Joined: 02/10/2011 Location: BulgariaPosts: 226 |
Two other temperature measurement projects: DuinoMite+LM335Z and DuinoMite + K-type thermocouple |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
