 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Windmills : Simple and accurate RPM measurement
| Author | Message | ||||
imsmooth Senior Member  Joined: 07/02/2008 Location: United StatesPosts: 214 |
I am not the first to do this, but I thought it would be educational for some to see how to measure the rpm using a simple bicycle computer. Here is a link to my web diary. measure rpm method |
||||
catchnthe-)))) Newbie  Joined: 03/01/2009 Location: United StatesPosts: 24 |
imsmooth: Nice looking project well. done. idea of disc brake is good also. Freedom allows us a lot "Please don't abuse." |
||||
Gizmo Admin Group  Joined: 05/06/2004 Location: AustraliaPosts: 5119 |
Good write up imsmooth. My first anemometer was based on a bike computer. The best time to plant a tree was twenty years ago, the second best time is right now. JAQ |
||||
| brucedownunder2 Guru  Joined: 14/09/2005 Location: AustraliaPosts: 1548 |
Excellant write-up ,IM,and yes you are definately SMOOTH ,lol. I have the disc brake like yours ,and now, thanks to you ,I will make up that rotator to stop tangling of the pull-line. Thanks a lot for such an excellant write-up. Bruce Bushboy |
||||
| domwild Guru Joined: 16/12/2005 Location: AustraliaPosts: 873 |
Thanks for this and all the other items I picked up by following the "Next" prompts. Great engineering! A mechanical disk brake like the ones on the MW monsters! Next you will be turning a variable-pitch system on your lathe! Keep it going! Taxation as a means of achieving prosperity is like a man standing inside a bucket trying to lift himself up. Winston Churchill |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
