![]() |
Forum Index : Windmills : charging a 12v batt in a 24V string
Author | Message | ||||
rgormley Senior Member ![]() Joined: 22/02/2006 Location: AustraliaPosts: 245 |
Hi all, My batt bank is 24v 12v X 2 batts in series (6 Parr strings) Each batt is 50AH so 300AH yes? (6 x 50AH) anyway the question is that my 24v wind turnbine needs a fair bit of wind to charge at a 24v setup so other than making up a cap doubler.... i stuck the mill accross one of the 12 v batss and it is happily putting 3-7 amp average in light winds into the 12v batt The question is will the other batts in the series/parr arrangment absorb the extra charge the one batt is taking or ...or will it stuff the batt or what? Thanks.... ![]() |
||||
Robb Senior Member ![]() Joined: 01/08/2007 Location: AustraliaPosts: 221 |
![]() Useing conventional current flow for the sake of ease here but I think you get the drift. |
||||
Gizmo![]() Admin Group ![]() Joined: 05/06/2004 Location: AustraliaPosts: 5119 |
Yes this is bad. You'll end up overcharging the single battery and draining the battery in series with it. This will damage the batteries if left for two long. I was going to suggest using a 12 to 24v inverter ( available from auto shops for driving trucks lights off a single 12v battery ), but they only supply 24 volts and you need more than that to start charging a 24v battery bank. Maybe someone else has a easy solution. Glenn The best time to plant a tree was twenty years ago, the second best time is right now. JAQ |
||||
rgormley Senior Member ![]() Joined: 22/02/2006 Location: AustraliaPosts: 245 |
ok have swaped the mill back across the 24v bank. thanks....savd my batts i think... i measured the battery in series and was down to 11.2v) and the charging batt was 15.2v |
||||
Gizmo![]() Admin Group ![]() Joined: 05/06/2004 Location: AustraliaPosts: 5119 |
If you can, put a charger across that batery thats a bit low, you need to keep the batteries equalized ( same voltage ). The best time to plant a tree was twenty years ago, the second best time is right now. JAQ |
||||
![]() |
![]() |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |