Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
BenandAmber Guru Joined: 16/02/2019 Location: United StatesPosts: 961
Posted: 12:52am 07 Apr 2019
Copy link to clipboard
Print this post
This was a working inverter up till a few nights ago we used it in the RV to run a small air conditioner and tools for working on on the RV
We had no use for a 12 volt inverter we have changed to 48 volts so we use the nice case that these boards were in for our 48volt little China board project
So with this being said we are looking for advice on a project we can do with these leftover boards
or if someone else has a use for these leftover boards we would exchange them for a oz Style control board PCB and a updated list of the parts
or if nobody has the PCB they can send us the Gerber file so we can have one made and a updated parts list
you may say you can go get this information for yourself well it's very confusing to me I can't figure it out
I've read for months and can't figure out which Gerber file is the newest one and which updated parts list is the latest one
Who ever wanted this would probably have to pay shipping if shipping wasn't very much I will cover it not much is 15 or so bucks
Thanks everyone for the kind words and good advicebe warned i am good parrot but Dumber than a box of rocks
BenandAmber Guru Joined: 16/02/2019 Location: United StatesPosts: 961
Posted: 06:12am 09 Apr 2019
Copy link to clipboard
Print this post
No takers on the 12 volt high frequency huh I don't blame anybody Now That I Found low frequency
I just about wouldn't have a high frequency one either just thought it might be good to make into something elsebe warned i am good parrot but Dumber than a box of rocks
Ralph2k6 Senior Member Joined: 24/09/2017 Location: AustraliaPosts: 129
Posted: 09:10am 09 Apr 2019
Copy link to clipboard
Print this post
You may be able to salvage useful parts off it in the future.Ralph