Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 06:52 08 Jul 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : New PIC32 Arduino Style Board

     Page 2 of 2    
Author Message
donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1314
Posted: 08:04am 07 Oct 2012
Copy link to clipboard 
Print this post

  elproducts said  
Mouser Details on Leaded USB Connector


Chuck,
It appears to be very expensive compared to a standard BM type connector.
Perhaps it is just Mouser pricing, but I know I was able to buy the BMs from a reseller in Australia for about 50 cents each, so I can only imagine what the "Chinese" price would be.

The Wurth connector originates in Germany. Perhaps it can be sourced somewhat cheaper through other channels.

Don...
https://www.dontronics.com
 
elproducts

Senior Member

Joined: 19/06/2011
Location: United States
Posts: 282
Posted: 08:46am 07 Oct 2012
Copy link to clipboard 
Print this post

Don,
I agree completely and I'll continue to search for a lower cost option now that I know they exist.
But when I want to make a small board with USB the larger, lower cost B type won't fit or makes the module too bulky. So having this leaded option for the mini is a bonus.
www.elproducts.com
 
donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1314
Posted: 08:49am 07 Oct 2012
Copy link to clipboard 
Print this post

  elproducts said   Don,
I agree completely and I'll continue to search for a lower cost option now that I know they exist.
But when I want to make a small board with USB the larger, lower cost B type won't fit or makes the module too bulky. So having this leaded option for the mini is a bonus.


Sure, fully understand Chuck.

Don...
https://www.dontronics.com
 
MicroBlocks

Guru

Joined: 12/05/2012
Location: Thailand
Posts: 2209
Posted: 11:53am 07 Oct 2012
Copy link to clipboard 
Print this post

I maybe can be of help with that USB connector. I use them a lot for my own projects and have many in stock.
In what currency do you need a price. I calculate in Thai baht so that is not really helpful i think.

Here is a picture:



I have a good source for things like that so if you need something else, just ask. :)
Edited by TZAdvantage 2012-10-08
Microblocks. Build with logic.
 
isochronic
Guru

Joined: 21/01/2012
Location: Australia
Posts: 689
Posted: 03:20pm 09 Oct 2012
Copy link to clipboard 
Print this post

Some info about the 16F1455 :

http://www.ianrolfe.com/category/microcontroller/pic/

ie it is still pre-production.
 
paceman
Guru

Joined: 07/10/2011
Location: Australia
Posts: 1329
Posted: 05:25pm 09 Oct 2012
Copy link to clipboard 
Print this post

  chronic said  
The dspic33f at 40 mips certainly need the low esr. Microchip boards
tends to use small format 0805 Murata / Panasonic smd ceramics, I
have settled on the larger size 1206 equivalent which are much easier
to handle,
Murata GRM31CR71A106KA01L


These caps are available at Rockby in 1206 format. $0.24 ea. 10 minimum and multiples thereafter.
 
MicroBlocks

Guru

Joined: 12/05/2012
Location: Thailand
Posts: 2209
Posted: 06:16pm 09 Oct 2012
Copy link to clipboard 
Print this post

  chronic said   Some info about the 16F1455 :

http://www.ianrolfe.com/category/microcontroller/pic/

ie it is still pre-production.

The DIP version should be in stock end of october. I already pre-ordered some.
Microblocks. Build with logic.
 
     Page 2 of 2    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025